HOW TO MAKE YOUR CELL PHONE RING
“WE'RE NOT GONNA TAKE IT”,
BY TWISTED SISTER
INSTEAD OF FUR ELISE OR WHATEVER
1) Remove the back panel (you will need a small
Philips’screwdriver)
2) Find the Ring Program Module. It should be
a small blue or purple cylinder with two leads coming out one end
and one lead coming out the other.
3) When you have found the module, remove single
lead from its terminal. The double lead must be left intact.
4) Connect this terminal to a PCI port with
a K2800bus45 cable (the kind used for overclocking a laser printer)
and open a DOS prompt on the pc.
5) Enter the command line
edit *&* j:\cd\cards\open\default\fureliseorwhatever
6) In the “default” directory, there will be
a file containing this sequence, or something like it:
1.012700
2.012600
3.012700
4.012600
5.012700
6.012200
7.012500
8.012300
9.012000
Change this sequence to read as follows:
1.012700
2.012700
3.012200
4.012700
5.012900
6.012200
7) Run the sischk.exe to ensure that the change
has been recorded. If you receive a “type 301” error, repeat steps
5 and 6.
8) Disconnect the K2800bus45 and re-connect
the lead from the phone’s board. Re-attach the back panel with a
Philips’ screwdriver.
